Dealer Enquiries Invited
DecalPRO Complete "Starter" kit

DecalPro kitCONTENTS:

• 2x Toner Transfer Paper (20 sheets)

• TRF Sampler Foil Pack (20 foils 8" wide by 36" long)

• Preprinted Sample Color and B&W Sample Test Images

• Carrier Board - 8" x 10"

• Carrier Mylar - 8" x 15 feet long

• 3M "2080" Very Low Tack Tape roll

• KK-2000 Adhesive Spray

There is also a recommended laminator shown below that is needed to make this process work properly

(Click on individual images below to enlarge)

Two packs (20 sheets) 8-1/2" x 11" letter-size specially coated paper. More info..


B&W and COLOR samples to start learning the sytem right out of the box More info...

3M "Post-It" TAPE:

Specialty low-tack tape, 1" wide x 700" long. More info...


TRF Sampler

Included in the kit is a master set of all 19 foils... a "Whitman's Sapler" pack if you will of all foils: 8" wide x 36" long each. More info...


Novel alcohol-based "KK-2000" spray adhesive. An absolute most to make the system work perfectly. More info...


Special fiberglass board prevents foils from wrinkling, and...unique 1/2mil mylar "Carrier" holds the graphic prior to transfer. More info...

Key to this process is the "laminator". Not all laminators have the anywhere near the proper performance needed for DecalPro. We discovered the absolute lowest cost unit with full 10mil capability, the Tamerica Model:"SM-330".

SM-330There are only a few pouch laminators that deliver the right combination of Speed, Pressure and Heat to make our process work. In the USA/Canada the ideal performing unit is the Tamerica SM-330.

This high quality unit manufactured by Tamerica Products, Inc (USA) features conventional 4-roller design with temperature control and the highest roller pressure.

Major Features:

• UL & CA Listed Certification

• Over-temp heater shutdown

• Stable electronically controlled temperature to 330ºF

• Heavy-duty, reversible motor

• Korean quality control (superior design & construction quality to similar Chinese units)

• The SM-330 has had a long sales history on the market with a proven track record

• Tamerica Products, Inc. (USA based company out of California)

• Weight: 13# (boxed shipping weight)

• 90-day Mfg. Warranty

Now available from our USA online store for $139.95.

In Canada: (Phone: 416-285-7044)

NOTE TO EUROPEAN CUSTOMERS: Since the Tamerica unit is not available in Europe, but there is one that performs beautifully.

Analog LaminatorThis unit is a generic Chinese import that goes under various names. Key to finding this unit is to match the basic looks of the unit.

This unit uses an analog temperature meter. It is internally fused but does not have any overheat (heater shut-down) protection so it's a very good idea to get an inexpensive "smoke detector" and place it somewhere above the unit in the event there was a malfunction in the heat monitoring circuit. Roller presssure needs to be adjusted via 4 compression spring screws accessed from the bottom of the unit. (This simple mod is shown here. Disregard that there are pictures in this description showing a digital display. Mechanically, they are the same.)

Also Needed: HOT AIR GUN

We do not sell this item since it's locally available at any hardware store and a common item that most people already have. If you don't have one, we recommend the inexpensive Milwauke brand normally found in your larger Home Depot/Lowe's type stores. This item is necessary since a conventional "hair dryer" does not get hot enough for the job it must do. Prices range from about $25 at better hardware stores.

Other Common Supplies Needed:

Rubbing Alcohol: Available at any drug or hardware store
Water Tray: Must be as large or larger than the largest graphic you will be making
Paper Towel
X-Acto knife• & a straight-edge ruler
Paper cutter