The DecalPro Starter Kit $89.95
Export/Air version (no adhesive) $74.95
The Starter Kit contains everything you need* to make 20 - 8"x10" images (or many more smaller images). All items in the kit are shown below and can be re-ordered individually.
The in-depth Instructional Manual (see TUTORIAL > Instructions menu above) covers the entire process. We highly recommend reading over this 20 page manual while waiting for your kit to arrive so you're ready to start. NOTE: The "Export/Air" kit does not have the KK-2000 spray adhesive as it's not allowed on any aircraft or out of the USA due to being a 'pressurized vessel'. Click on COMPONENTS > Adhesive menu button above for alternative adhesive brands outside of the USA. For international order, we suggest locating an adhesive first before ordering!
* Additional Items Required:
• Suitable laminator (see "Laminator" menu button above)
• Conventional, inexpensive hot air gun
Starter kit components are available separately on our online Store. (For more detailed info on each item, select the "COMPONENTS" menu above.)
• Toner Transfer Paper (2x 10-sheet packs)
• TRF Sampler Pack (White, Grey, Black, 13 Metallics, 2 Holographic, 2 Special Effect, 8" x 36")
• Preprinted practice images
• Mylar Carrier Flat-Pak (8" x 15')
• Carrier Board kit (8-1/2" x 11" fiberglass laminate with mounting strips)
• KK-2000 Adhesive Spray
• Low-Tack Clean-up Tape roll
• Tack Cloth