DecalPRO® is the only product on the market where you can make your own real "dry transfer" text and graphics in minutes for unlimited applications and surfaces from soft cardboard to glass. There is simply nothing else on the market that allows you to be able to make real dry transfers in minutes using any conventional laser printer or photo-copier.
• Any graphic you can print
• Any surface - even a wax candle
• Any color - metallic, white or full-color
... all "on demand" in under 10 minutes
< Click image for details >
Make your own rub-down pressure-sensitive dry transfer graphics in COLOR, WHITE and true METALLIC transfers in under 10 minutes... totally "on-demand" system. Create transfers as small as 1/4" square up to 8" x 10".
• Transfer FULL-COLOR images onto black backgrounds
Never before possible without sending your artwork out to be fabricated. Now you can put either a white or metallic reflective layer under just the color image in one easy step.
• Convert any black toner image into a WHITE graphic
No need for any special printer (like the defunct ALPS printers) to be able to make white graphics. Simply print-out black toner and apply the white (or any of 20 foil colors) to convert black toner that color
• Make METALLIC colored graphics from just black toner images
An entire rainbow of metallic color foils at your fingertips that will create amazingly beautiful graphics from black toner.
Our DIY process allows you to make real dry-transfers using any standard laser printer* or conventional copier with a suitable 10mil-type laminator. DecalProFX® transfers are actually better in several respects than expensive 'send-out' commercially-made dry transfers. (*Brother® printers do not work well with our process due to their use of non-standard toner)
Here are our most common user groups getting top-notch professional looking results for one-off projects in minutes
Used professionally by Graphic Artists, Industrial Designers and Professional Model Makers (APMM)
• EXTREMELY thin dry transfers
• No permanent 'halo' carrier
• Under 10-minute process
• On-Demand system
• Durable images
Our process does require the use of a capable laminator to create images. The two least expensive "10-mil" type laminators that work great with this process are the Tamerica® SM-330 and the Apache® AL13P shown below. The Tamerica is a far better design and needs no modifications. The Apache just needs the roller tensioning springs tightened.
PulsarProFX®, LLC • 4611 Crow Creek Drive • Colorado Springs, CO 80922-4615 • Phone/Text: (850) 926-2009 • FAX (888) 280-7570 • EMAIL: email@example.com • Store Hours: 9am - 5pm MST